Chowiez
Gunnery Segeant
Butter Knife Specialist
Posts: 600
|
Post by Chowiez on Jul 24, 2008 13:34:12 GMT 8
Can anyone help me install a tightbore and stronger hammer spring on my M700? Also, I dont know waht barrels to get and what hammer springs I should get.
|
|
|
Post by Noa on Jul 24, 2008 14:47:23 GMT 8
Check this out for hammer spring info. You can tighten a screw inside for more power. www.airsoftcanada.com/archive/index.php/t-13768.htmlYou got the instruction manual with the gun right? To get to the hammer spring, you need to unscrew the bolt out via the magazine well. And for the inner barrel, you'll need to get the top reciever out of the main body. There are only a few screws so it isn't that hard The nice thing about gas guns =D alot less screws!
|
|
Chowiez
Gunnery Segeant
Butter Knife Specialist
Posts: 600
|
Post by Chowiez on Jul 24, 2008 18:06:07 GMT 8
Yay! I got my KJ M700 Take down version.Yes, it does come with a manual. Lol, Where is the hammer?
|
|
Ozone
Corporal
Posts: 184
|
Post by Ozone on Jul 30, 2008 22:14:34 GMT 8
Hey, i have a Tanaka M700 A.I.C.S soo, the hammer is on the bolt at the back, when you cock it, there should be a small circular nub which protrudes out which indicates its cocked. Remove the bolt and unscrew the main bolt assembly by removing two screws, then twisting the main shaft. when you take off the main shaft, you should see the spring and its guide, to remove it unscrew the screw on the top of the guide and then u should be able to change the springs and hammer!! I hope that helps but it kinda depends on if your rifle is a Tanaka or not because i havn't had any exp. with others!!!! (i would post some pics but i dont know how.....hint for help)
|
|
|
Post by Noa on Jul 30, 2008 22:34:46 GMT 8
Posting pics help:
Upload to Photobucket or image hoster.
click the picture button on the "Add Tags:" section in the post creation page with the url in between and the picture will show up.
--
The KJ is a copy of the Tanaka. The AICS has the PCS but bolt assembly wise it's the same =)
|
|
Ozone
Corporal
Posts: 184
|
Post by Ozone on Jul 30, 2008 22:44:13 GMT 8
Posting pics help: Upload to Photobucket or image hoster. click the picture button on the "Add Tags:" section in the post creation page with the url in between and the picture will show up. -- The KJ is a copy of the Tanaka. The AICS has the PCS but bolt assembly wise it's the same =) Ohh, thats how u do it...thanks, i'll try that when i next ahave somepics!!! thanks.
|
|
Chowiez
Gunnery Segeant
Butter Knife Specialist
Posts: 600
|
Post by Chowiez on Jul 30, 2008 23:19:32 GMT 8
M700 Sniper team?
|
|
|
Post by malavern on Aug 5, 2008 22:25:14 GMT 8
stop making me jealous!!
|
|
Ozone
Corporal
Posts: 184
|
Post by Ozone on Aug 7, 2008 1:33:55 GMT 8
|
|
Ozone
Corporal
Posts: 184
|
Post by Ozone on Aug 7, 2008 1:38:45 GMT 8
oh, and by the way, is there anywhere in HK that does custom inner barrels, coz to get any of the ones i want means either ordering from somewhere miles off like America or doing massive internal mods to accommodate a new barrel for an APS of VSR..... though they are quite nice.....
|
|
|
Post by malavern on Aug 7, 2008 15:37:43 GMT 8
try redwolf or if i really must, i can ask some of me friends in the industry to custom a few, but will have to be in bulk orders of min 20pcs
|
|
Ozone
Corporal
Posts: 184
|
Post by Ozone on Aug 26, 2008 0:56:34 GMT 8
Sorry this is a bit late but i thought i might as well follow up, First pull back the bolt of your rifle, Then, locate a small nub just in front of the trigger, press it and then you should be able to remove the bolt, After that (this may differ to your model) unscrew the screws along the front half of the bolt and remove and take apart!!- This should expose the firing spring and spring guide. Find the screw on the top of the spring guide and unscrew, this should allow you to remove the bolt handle, hammer and hammer housing!!! Good modding!!! -More soon
|
|
Chowiez
Gunnery Segeant
Butter Knife Specialist
Posts: 600
|
Post by Chowiez on Aug 27, 2008 20:21:49 GMT 8
Noa, I think I heard you saying that when you screw in a screw, it makes the gun a little stronger.. which one is it?
|
|
|
Post by malavern on Aug 27, 2008 20:25:08 GMT 8
the back screw... i mentioned that to him first... anyways, all it does is tightens the spring, which in turn increases the winded pressure.
directly applying silicon to the spring and spring houses helps too!!
|
|
Ozone
Corporal
Posts: 184
|
Post by Ozone on Sept 18, 2008 1:20:18 GMT 8
Chowiez, what kind of power does your M700 take down spit out coz im quite temped to sell my Tanaka.....if thats even possible ....
|
|
Chowiez
Gunnery Segeant
Butter Knife Specialist
Posts: 600
|
Post by Chowiez on Sept 18, 2008 6:45:55 GMT 8
1.9J to bottom of can. green gas 1.3J 134A gas 2 sides
Ill buy a long mag if you have one..
|
|
Ozone
Corporal
Posts: 184
|
Post by Ozone on Sept 18, 2008 17:59:41 GMT 8
thats sounds quite good!!! And Yeah i do have a spare M700 long mag going, coz i dont really nedd it! I get back to HK around the 20th october so we can sort out a little deal if ur interested....more on that later!!
|
|
Chowiez
Gunnery Segeant
Butter Knife Specialist
Posts: 600
|
Post by Chowiez on Sept 18, 2008 18:25:04 GMT 8
how much is what intrests me.. 400 in den...
|
|
Ozone
Corporal
Posts: 184
|
Post by Ozone on Sept 18, 2008 20:07:34 GMT 8
Meh, 400 sounds cool, i'm currently in the Uk right now but My Moblie is 07767420415 (uk) 61426516 (HK) so give me a call around this week or closer to the time (october 20th) so we can settle!!!
|
|
Chowiez
Gunnery Segeant
Butter Knife Specialist
Posts: 600
|
Post by Chowiez on Sept 18, 2008 21:55:08 GMT 8
400 for new... and yours is 2nd hand so... 170?
|
|
Ozone
Corporal
Posts: 184
|
Post by Ozone on Sept 18, 2008 21:57:36 GMT 8
yeah but its only been used once....meh wateves....170s cool...possibly 200???
|
|
Chowiez
Gunnery Segeant
Butter Knife Specialist
Posts: 600
|
Post by Chowiez on Sept 18, 2008 22:37:46 GMT 8
200's fine.. Do you have O rings all fitted and no leaking gas??
|
|
Ozone
Corporal
Posts: 184
|
Post by Ozone on Sept 18, 2008 23:28:26 GMT 8
Everythings as it came from the box, no leaks, no damage and all of the valves and Orings are fine!!!
|
|
Ozone
Corporal
Posts: 184
|
Post by Ozone on Sept 19, 2008 2:25:30 GMT 8
thats sounds quite good!!! And Yeah i do have a spare M700 long mag going..... I might add its a Tanaka so not sure of compatibility....
|
|
Chowiez
Gunnery Segeant
Butter Knife Specialist
Posts: 600
|
Post by Chowiez on Sept 19, 2008 6:49:55 GMT 8
M700 can use all M700 things. Thats what I like about it... Yeah, so just post here when you come back from UK.. By that time, I might have gotten bored of my M700 anyways..
|
|
Ozone
Corporal
Posts: 184
|
Post by Ozone on Sept 19, 2008 14:17:02 GMT 8
ok then mate!!!! -i call shotgun if you do!!!!
|
|
Ozone
Corporal
Posts: 184
|
Post by Ozone on Sept 19, 2008 23:55:01 GMT 8
Can anyone help me install a tightbore and stronger hammer spring on my M700? Also, I dont know waht barrels to get and what hammer springs I should get. Hey, also, what and if barrel did you buy for your M700, coz i cant find any place which does the right length 6.01 mm!!!!
|
|
Chowiez
Gunnery Segeant
Butter Knife Specialist
Posts: 600
|
Post by Chowiez on Sept 20, 2008 8:15:08 GMT 8
Stock KJW already has good hammer springs, a nice barrel. Not much change I can think of...
|
|
Ozone
Corporal
Posts: 184
|
Post by Ozone on Sept 21, 2008 1:25:14 GMT 8
oh ok, coz on some sites it says that the KJW M700 comes with a stock barrel of 6.10mm!!!!! thats like...huge!!!
|
|
|
Post by yonathanho on Sept 22, 2008 1:38:15 GMT 8
most likely a misprint/typo
|
|