|
Post by Noa on Aug 5, 2008 2:26:06 GMT 8
This was suggest by Malavern when I was talking with him at IFC. And lol - it worked. Just pop off the cap and stick in the $18 HKD red laser (perfect fit). No filing no glueing needed. And here you go. Barrel centered red laser. Fk yeah!
|
|
play150
Staff Segeant
I like chocolate and chips.
Posts: 460
|
Post by play150 on Aug 5, 2008 5:27:56 GMT 8
Oooooh! Sweet! And the weight on the gun is even too!
|
|
|
Post by malavern on Aug 5, 2008 22:23:17 GMT 8
pure wins! if only i can do that with me sniper rifle too, good way to point out targets for teammates
|
|
|
Post by Noa on Aug 6, 2008 2:58:26 GMT 8
pure wins! if only i can do that with me sniper rifle too, good way to point out targets for teammates Barrel clamp a green laser on, but the pressure switch would have to be activated by your left hand. Or use the barrel clamp and clamp it onto your scope <- tried and tested.
|
|
|
Post by malavern on Aug 7, 2008 15:38:46 GMT 8
i was actually thinking about drilling a nice little hole to shove the laser directly below the barrel, and inline with it too!!
|
|
|
Post by malavern on Aug 7, 2008 15:39:46 GMT 8
btw, you can remove the barrel cap of the UMP to fit other types of flash-hiders/silencer mounts directly onto the outter barrel!
|
|