Chowiez
Gunnery Segeant
Butter Knife Specialist
Posts: 600
|
Post by Chowiez on Oct 7, 2008 17:57:04 GMT 8
Okay, some of you may have seen my sights going KA BAM during test fire in millita game.... Im going for an infinity slide (silver-black) In order for me to do that, i need to take my internals apart... This is what I did......I kind of got stuck.... The damage to the sights. Missing spring Nothing done to it Slide taken apart Slide Slide - Guide spring, spring guide and spring stopper Inner barrel (how to take apart) Barrel apart Okay.. Here is the problem... I cant take that black thing out of my slide... Dont know what its called. But first, you unscrew the hex key Then, Your ment to lift up, and push.... But the baby didnt come out.... I sprayed it with silicone(soaked) and it still wont come out... Whats wrong? HELP! Malavern, can you tell sauli to help me out? It moves a TINY little bit, but it just doesnt come out...
|
|
|
Post by yonathanho on Oct 8, 2008 1:09:09 GMT 8
the pictures arent very clear, try activating MACRO on your camera, usually indicated by a flower symbol, it's for taking close up pics
|
|
|
Post by malavern on Oct 8, 2008 1:55:44 GMT 8
its a plastic slide, you need to pry it apart a bit to get the chamber out... here read this: 5.1 Tipsif you be free on thursday evening, after 6, i can meet you at kws and get the replacement parts, as well as teach you how to do basic installation, but since i'm not a proper smithy, i cant install the metal slide for you... edit: Note: that screw is called the hex screw Note2: i believe i have an extra plastic 5.1 slide for you, if you dont want to spend so much money to get a sexy new slide... which you may cry over once you scratch it...
|
|
|
Post by milkkart on Oct 8, 2008 2:45:39 GMT 8
|
|
Chowiez
Gunnery Segeant
Butter Knife Specialist
Posts: 600
|
Post by Chowiez on Oct 8, 2008 19:54:26 GMT 8
Seen the video more than 5 times before you posted lol... I wouldnt have known how to do it if I didnt watch it
Hmmm... Its actully stuck... I dont really want to pry it cause im clumsy and WILL break the chamber....
Whats the spring im missing called? Where do i get it? And should I get a new chamber?
|
|
|
Post by malavern on Oct 8, 2008 20:20:01 GMT 8
you dont pry the chamber, you pry the slide... its not stuck, its just that the stock marui slide doesnt have a groove cut into it to allow easy changing of parts.
Its almost physically impossible to break the chamber as it is made out of aluminum (Aluminium), and the blowback nozzle is inside the chamber.
The spring there is called the blowback nozzle spring guide. You can get 1 from Tokyo Model Co for $5. (i've looked everywhere else, and there aint nobody else selling em!)
Your stock chamber is good enough. Hell even I'm still using stock, even though almost everythign else is changed
|
|
Chowiez
Gunnery Segeant
Butter Knife Specialist
Posts: 600
|
Post by Chowiez on Oct 8, 2008 20:32:21 GMT 8
Where is Tokyo model co?
So I just smash my slide... Then the black thing will easily come out?
|
|
Ninja
Gunnery Segeant
不信教
Posts: 547
|
Post by Ninja on Oct 10, 2008 0:32:20 GMT 8
to get the blowback chamber out... you'll HAVE to pry it to get it out it's tougher than you think.
|
|
|
Post by malavern on Oct 10, 2008 1:33:58 GMT 8
Where is Tokyo model co? So I just smash my slide... Then the black thing will easily come out? Its not SMASH... as billy and i said... PRY!!!
|
|